Why can't Cohen gas stove keep the fire after igni

2022-07-22
  • Detail

Today, the editor wants to share with you the common problems of gas stoves in home life, and make a simple analysis, which is very practical. After reading it, remember to share with other partners 1q: why is the gas stoves ignited

today, the editor wants to share with you the common small problems of gas stoves in home life, and make a simple analysis, which is very practical. After reading it, remember to share with other partners

1

q: Why did the gas stoves "fail to keep the fire" after ignition, and the flame went out soon

first of all, check whether the battery in the gas cooker has power. Some users "can't hold the fire" because the switch knob is not pressed in place. In some users' homes, the damper of gas stoves is adjusted too much, and too much oxygen will also lead to this problem. At this time, the damper should be adjusted appropriately

for some stoves with flameout protection device, the flameout protection needle (next to the ignition needle) is too far away from the flame, so that the operation of the flameout protection device cuts off the air source. Users can solve the problem by adjusting the inner flame cover

in addition, the flameout protection needle in the gas stove is covered with oil, the solenoid valve is damaged, and the pulse is damaged, which can also cause the flame to "not stay"

2

q: what's the matter with the "red fire" in the flame

red fire means that it does not burn enough. Over time, it will produce carbon monoxide, which is toxic

what is the reason and how to deal with it

1. Insufficient primary air intake or improper damper adjustment can be achieved by adjusting the damper. 2. If there are foreign matters in the nozzle, gas pipe and fire cover, clean the foreign matters in the nozzle, gas pipe and fire cover. 3. The applicable gas source of the cooker is inconsistent with the actual gas source. Replace the cooker or change the gas source

3

q: what are the reasons for the failure of the inner extension or extension fire cover and the small flame

this kind of situation is mostly caused by the blockage of the fire outlet hole and nozzle of the fire cover by oil and impurities. If the fire outlet hole of the fire cover is blocked, users can use toothpicks and fine needles to connect. Nozzle blockage requires professional maintenance personnel to clean or replace; In addition, the pollution of solenoid valve and other parts by dirt will also cause problems such as small flame and no fire

4

q: sometimes I smell a peculiar smell when cooking with natural gas. Why

after natural gas replacement, many users report that they will smell peculiar smell when using natural gas, which is mostly caused by insufficient natural gas combustion and waste gas overflow. At this time, users need to properly adjust the stove damper to mix oxygen with natural gas to fully burn natural gas

in addition, the smell may be caused by natural gas leakage

5

q: what about natural gas leakage at home

1. Immediately close the gas appliance switch and the front valve of the meter. 2. Do not touch electrical appliances. Turning on and off any electrical appliances, such as electric lights, exhaust fans, range hoods, air conditioners, electric switches, wired and wireless phones, doorbells, refrigerators, etc., may produce tiny sparks and cause explosions. 3. Open the doors and windows. Let the air circulate in order to reduce the concentration of natural gas and avoid danger. 4. Immediately leave the gas leakage site, prevent irrelevant personnel from approaching, call the police in the safe area or notify the gas company to repair

6

q: why is there no gas when the switch is turned on

users can check and solve the following points:

1. Whether the battery is charged. 2. Whether there is a problem with the gas pipeline in the community, resulting in gas shutdown. 3. Whether the air pipe is bent and flattened. 4. Whether the filter screen is blocked

太原性病医院

重庆性病医院

太原外阴白斑医院

Copyright © 2011 JIN SHI